NAME
    AnyEvent::MPV - remote control mpv (https://mpv.io)

SYNOPSIS
       use AnyEvent::MPV;

DESCRIPTION
    This module allows you to remote control mpv (a video player). It also
    is an AnyEvent user, you need to make sure that you use and run a
    supported event loop.

    There are other modules doing this, and I haven't looked much at them
    other than to decide that they don't handle encodings correctly, and
    since none of them use AnyEvent, I wrote my own. When in doubt, have a
    look at them, too.

    Knowledge of the mpv command interface
    <https://mpv.io/manual/stable/#command-interface> is required to use
    this module.

    Features of this module are:

    uses AnyEvent, so integrates well into most event-based programs
    supports asynchronous and synchronous operation
    allows you to properly pass binary filenames
    accepts data encoded in any way (does not crash when mpv replies with
    non UTF-8 data)
    features a simple keybind/event system

  OVERVIEW OF OPERATION
    This module forks an mpv process and uses --input-ipc-client (or
    equivalent) to create a bidirectional communication channel between it
    and the mpv process.

    It then speaks the somewhat JSON-looking (but not really being JSON)
    protocol that mpv implements to both send it commands, decode and handle
    replies, and handle asynchronous events.

    Here is a very simple client:

       use AnyEvent;
       use AnyEvent::MPV;
   
       my $videofile = "./xyzzy.mp4";

       my $mpv = AnyEvent::MPV->new (trace => 1);

       $mpv->start ("--", $videofile);

       my $timer = AE::timer 2, 0, my $quit = AE::cv;
       $quit->recv;

    This starts mpv with the two arguments "--" and $videofile, which it
    should load and play. It then waits two seconds by starting a timer and
    quits. The "trace" argument to the constructor makes mpv more verbose
    and also prints the commands and responses, so you can have an idea what
    is going on.

    In my case, the above example would output something like this:

       [uosc] Disabled because original osc is enabled!
       mpv> {"event":"start-file","playlist_entry_id":1}
       mpv> {"event":"tracks-changed"}
        (+) Video --vid=1 (*) (h264 480x480 30.000fps)
       mpv> {"event":"metadata-update"}
       mpv> {"event":"file-loaded"}
       Using hardware decoding (nvdec).
       mpv> {"event":"video-reconfig"}
       VO: [gpu] 480x480 cuda[nv12]
       mpv> {"event":"video-reconfig"}
       mpv> {"event":"playback-restart"}

    This is not usually very useful (you could just run mpv as a simple
    shell command), so let us load the file at runtime:

       use AnyEvent;
       use AnyEvent::MPV;
   
       my $videofile = "./xyzzy.mp4";

       my $mpv = AnyEvent::MPV->new (
          trace => 1,
          args  => ["--pause", "--idle=yes"],
       );

       $mpv->start;
       $mpv->cmd_recv (loadfile => $mpv->escape_binary ($videofile));
       $mpv->cmd ("set", "pause", "no");

       my $timer = AE::timer 2, 0, my $quit = AE::cv;
       $quit->recv;

    This specifies extra arguments in the constructor - these arguments are
    used every time you "->start" mpv, while the arguments to "->start" are
    only used for this specific clal to0 "start". The argument --pause keeps
    mpv in pause mode (i.e. it does not play the file after loading it), and
    "--idle=yes" tells mpv to not quit when it does not have a playlist - as
    no files are specified on the command line.

    To load a file, we then send it a "loadfile" command, which accepts, as
    first argument, the URL or path to a video file. To make sure mpv does
    not misinterpret the path as a URL, it was prefixed with ./ (similarly
    to "protecting" paths in perls "open").

    Since commands send *to* mpv are send in UTF-8, we need to escape the
    filename (which might be in any encoding) using the "esscape_binary"
    method - this is not needed if your filenames are just ascii, or
    magically get interpreted correctly, but if you accept arbitrary
    filenamews (e.g. from the user), you need to do this.

    The "cmd_recv" method then queues the command, waits for a reply and
    returns the reply data (or croaks on error). mpv would, at this point,
    load the file and, if everything was successful, show the first frame
    and pause. Note that, since mpv is implement rather synchronously
    itself, do not expect commands to fail in many circumstances - for
    example, fit he file does not exit, you will likely get an event, but
    the "loadfile" command itself will run successfully.

    To unpause, we send another command, "set", to set the "pause" property
    to "no", this time using the "cmd" method, which queues the command, but
    instead of waiting for a reply, it immediately returns a condvar that
    cna be used to receive results.

    This should then cause mpv to start playing the video.

    It then again waits two seconds and quits.

    Now, just waiting two seconds is rather, eh, unuseful, so let's look at
    receiving events (using a somewhat embellished example):

       use AnyEvent;
       use AnyEvent::MPV;
   
       my $videofile = "xyzzy.mp4";

       my $quit = AE::cv;

       my $mpv = AnyEvent::MPV->new (
          trace => 1,
          args  => ["--pause", "--idle=yes"],
          on_event => sub {
             my ($mpv, $event, $data) = @_;

             if ($event eq "start-file") {
                $mpv->cmd ("set", "pause", "no");
             } elsif ($event eq "end-file") {
                print "end-file<$data->{reason}>\n";
                $quit->send;
             }
          },
       );

       $mpv->start;
       $mpv->cmd (loadfile => $mpv->escape_binary ($videofile));

       $quit->recv;

    This example uses a global condvar $quit to wait for the file to finish
    playing. Also, most of the logic is now in an "on_event" callback, which
    receives an event name and the actual event object.

    The two events we handle are "start-file", which is emitted by mpv once
    it has loaded a new file, and "end-file", which signals the end of a
    file.

    In the former event, we again set the "pause" property to "no" so the
    movie starts playing. For the latter event, we tell the main program to
    quit by invoking $quit.

    This should conclude the basics of operation. There are a few more
    examples later in the documentation.

  ENCODING CONVENTIONS
    As a rule of thumb, all data you pass to this module to be sent to mpv
    is expected to be in unicode. To pass something that isn't, you need to
    escape it using "escape_binary".

    Data received from $mpv, however, is *not* decoded to unicode, as data
    returned by mpv is not generally encoded in unicode, and the encoding is
    usually unspecified. So if you receive data and expect it to be in
    unicode, you need to first decode it from UTF-8, but note that this
    might fail. This is not a limitation of this module - mpv simply does
    not specify nor guarantee a specific encoding, or any encoding at all,
    in its protocol.

  METHODS
    $mpv = AnyEvent::MPV->new (key => value...)
        Creates a new "mpv" object, but does not yet do anything. The
        support key-value pairs are:

        mpv => $path
            The path to the mpv binary to use - by default, "mpv" is used
            and therefore, uses your "PATH" to find it.

        args => [...]
            Arguments to pass to mpv. These arguments are passed after the
            hardcoded arguments used by this module, but before the
            arguments passed ot "start". It does not matter whether you
            specify your arguments using this key, or in the "start" call,
            but when you invoke mpv multiple times, typically the arguments
            used for all invocations go here, while arguments used for
            specific invocations (e..g filenames) are passed to "start".

        trace => false|true|coderef
            Enables tracing if true. In trace mode, output from mpv is
            printed to standard error using a "mpv>" prefix, and commands
            sent to mpv are printed with a ">mpv" prefix.

            If a code reference is passed, then instead of printing to
            standard errort, this coderef is invoked with a first arfgument
            being either "mpv>" or ">mpv", and the second argument being a
            string to display. The default implementation simply does this:

               sub {
                  warn "$_[0] $_[1]\n";
               }

        on_eof => $coderef->($mpv)
        on_event => $coderef->($mpv, $event, $data)
        on_key => $coderef->($mpv, $string)
            These are invoked by the default method implementation of the
            same name - see below.

    $string = $mpv->escape_binary ($string)
        This module excects all command data sent to mpv to be in unicode.
        Some things are not, such as filenames. To pass binary data such as
        filenames through a comamnd, you need to escape it using this
        method.

        The simplest example is a "loadfile" command:

           $mpv->cmd_recv (loadfile => $mpv->escape_binary ($path));

    $started = $mpv->start (argument...)
        Starts mpv, passing the given arguemnts as extra arguments to mpv.
        If mpv is already running, it returns false, otherwise it returns a
        true value, so you can easily start mpv on demand by calling "start"
        just before using it, and if it is already running, it will not be
        started again.

        The arguments passwd to mpv are a set of hardcoded built-in
        arguments, followed by the arguments specified in the constructor,
        followed by the arguments passwd to this method. The built-in
        arguments currently are --no-input-terminal, --really-quiet (or
        --quiet in "trace" mode), and "--input-ipc-client" (or equivalent).

        Some commonly used and/or even useful arguments you might want to
        pass are:

        --idle=yes or --idle=once to keep mpv from quitting when you don't
        specify a file to play.
        --pause, to keep mpv from instantly starting to play a file, in case
        you want to inspect/change properties first.
        --force-window=no (or similar), to keep mpv from instantly opening a
        window, or to force it to do so.
        --audio-client-name=yourappname, to make sure audio streams are
        associated witht eh right program.
        --wid=id, to embed mpv into another application.
        --no-terminal, --no-input-default-bindings, --no-input-cursor,
        --input-conf=/dev/null, --input-vo-keyboard=no - to ensure only you
        control input.

        The return value can be used to decide whether mpv needs
        initializing:

           if ($mpv->start) {
              $mpv->bind_key (...);
              $mpv->cmd (set => property => value);
              ...
           }

        You can immediately starting sending commands when this method
        returns, even if mpv has not yet started.

    $mpv->stop
        Ensures that mpv is being stopped, by killing mpv with a "TERM"
        signal if needed. After this, you can "->start" a new instance
        again.

    $mpv->on_eof
        This method is called when mpv quits - usually unexpectedly. The
        default implementation will call the "on_eof" code reference
        specified in the constructor, or do nothing if none was given.

        For subclassing, see *SUBCLASSING*, below.

    $mpv->on_event ($event, $data)
        This method is called when mpv sends an asynchronous event. The
        default implementation will call the "on_event" code reference
        specified in the constructor, or do nothing if none was given.

        The first/implicit argument is the $mpv object, the second is the
        event name (same as "$data->{event}", purely for convenience), and
        the third argument is the full event object as sent by mpv. See List
        of events <https://mpv.io/manual/stable/#list-of-events> in its
        documentation.

        For subclassing, see *SUBCLASSING*, below.

    $mpv->on_key ($string)
        Invoked when a key declared by "->bind_key" is pressed. The default
        invokes the "on_key" code reference specified in the constructor
        with the $mpv object and the key name as arguments, or do nothing if
        none was given.

        For more details and examples, see the "bind_key" method.

        For subclassing, see *SUBCLASSING*, below.

    $mpv->cmd ($command => $arg, $arg...)
        Queues a command to be sent to mpv, using the given arguments, and
        immediately return a condvar.

        See the mpv documentation
        <https://mpv.io/manual/stable/#list-of-input-commands> for details
        on individual commands.

        The condvar can be ignored:

           $mpv->cmd (set_property => "deinterlace", "yes");

        Or it can be used to synchronously wait for the command results:

           $cv = $mpv->cmd (get_property => "video-format");
           $format = $cv->recv;

           # or simpler:

           $format = $mpv->cmd (get_property => "video-format")->recv;

           # or even simpler:

           $format = $mpv->cmd_recv (get_property => "video-format");

        Or you can set a callback:

           $cv = $mpv->cmd (get_property => "video-format");
           $cv->cb (sub {
              my $format = $_[0]->recv;
           });

        On error, the condvar will croak when "recv" is called.

    $result = $mpv->cmd_recv ($command => $arg, $arg...)
        The same as calling "cmd" and immediately "recv" on its return
        value. Useful when you don't want to mess with mpv asynchronously or
        simply needs to have the result:

           $mpv->cmd_recv ("stop");
           $position = $mpv->cmd_recv ("get_property", "playback-time");

    $mpv->bind_key ($INPUT => $string)
        This is an extension implement by this module to make it easy to get
        key events. The way this is implemented is to bind a
        "client-message" witha first argument of "AnyEvent::MPV" and the
        $string you passed. This $string is then passed ot the "on_key"
        handle when the key is proessed, e.g.:

           my $mpv = AnyEvent::MPV->new (
              on_key => sub {
                 my ($mpv, $key) = @_;

                 if ($key eq "letmeout") {
                    print "user pressed escape\n";
                 }
              },
           );

           $mpv_>bind_key (ESC => "letmeout");

        The key configuration is lost when mpv is stopped and must be
        (re-)done after every "start".

  SUBCLASSING
    Like most perl objects, "AnyEvent::MPV" objects are implemented as
    hashes, with the constructor simply storing all passed key-value pairs
    in the object. If you want to subclass to provide your own "on_*"
    methods, be my guest and rummage around in the internals as much as you
    wish - the only guarantee that this module dcoes is that it will not use
    keys with double colons in the name, so youc an use those, or chose to
    simply not care and deal with the breakage.

    If you don't want to go to the effort of subclassing this module, you
    can also specify all event handlers as constructor keys.

SEE ALSO
    AnyEvent, the mpv command documentation
    <https://mpv.io/manual/stable/#command-interface>.

AUTHOR
     Marc Lehmann <schmorp@schmorp.de>
     http://home.schmorp.de/