NAME

    Mojo::IOLoop::Delay - (DISCOURAGED) Promises/A+ and flow-control
    helpers

SYNOPSIS

      use Mojo::IOLoop::Delay;
    
      # Synchronize multiple non-blocking operations
      my $delay = Mojo::IOLoop::Delay->new;
      $delay->steps(sub { say 'BOOM!' });
      for my $i (1 .. 10) {
        my $end = $delay->begin;
        Mojo::IOLoop->timer($i => sub {
          say 10 - $i;
          $end->();
        });
      }
      $delay->wait;
    
      # Sequentialize multiple non-blocking operations
      Mojo::IOLoop::Delay->new->steps(
    
        # First step (simple timer)
        sub ($delay) {
          Mojo::IOLoop->timer(2 => $delay->begin);
          say 'Second step in 2 seconds.';
        },
    
        # Second step (concurrent timers)
        sub ($delay, @args) {
          Mojo::IOLoop->timer(1 => $delay->begin);
          Mojo::IOLoop->timer(3 => $delay->begin);
          say 'Third step in 3 seconds.';
        },
    
        # Third step (the end)
        sub ($delay, @args) {
          say 'And done after 5 seconds total.';
        }
      )->wait;

DESCRIPTION

    Mojo::IOLoop::Delay adds flow-control helpers to Mojo::Promise, which
    can help you avoid deep nested closures that often result from
    continuation-passing style.

      use Mojo::IOLoop;
    
      # These deep nested closures are often referred to as "Callback Hell"
      Mojo::IOLoop->timer(3 => sub ($loop) {
    
        say '3 seconds';
        Mojo::IOLoop->timer(3 => sub ($loop) {
    
          say '6 seconds';
          Mojo::IOLoop->timer(3 => sub ($loop) {
    
            say '9 seconds';
            Mojo::IOLoop->stop;
          });
        });
      });
    
      Mojo::IOLoop->start;

    The idea behind Mojo::IOLoop::Delay is to turn the nested closures
    above into a flat series of closures. In the example below, the call to
    "begin" creates a code reference that we can pass to "timer" in
    Mojo::IOLoop as a callback, and that leads to the next closure in the
    series when executed.

      use Mojo::IOLoop;
    
      # Instead of nested closures we now have a simple chain of steps
      my $delay = Mojo::IOLoop->delay(
        sub ($delay) { Mojo::IOLoop->timer(3 => $delay->begin) },
        sub ($delay) {
          say '3 seconds';
          Mojo::IOLoop->timer(3 => $delay->begin);
        },
        sub ($delay) {
          say '6 seconds';
          Mojo::IOLoop->timer(3 => $delay->begin);
        },
        sub ($delay) { say '9 seconds' }
      );
      $delay->wait;

    Another positive side effect of this pattern is that we do not need to
    call "start" in Mojo::IOLoop and "stop" in Mojo::IOLoop manually,
    because we know exactly when our chain of "steps" has reached the end.
    So "wait" in Mojo::Promise can stop the event loop automatically if it
    had to be started at all in the first place.

DISCOURAGED! WARNING!

    This module has been extracted from Mojolicious and was removed from it
    at the 9.0 release. It is kept here for backwards compatibility
    purposes but there is no intention to maintain it further and it should
    be migrated away from as your earliest convenience.

    Though there is no intention of removing it from CPAN in the future it
    should be treated as deprecated and the metadata will mark it as such.
    It will receive no no-security-related changes going forward.

ATTRIBUTES

    Mojo::IOLoop::Delay inherits all attributes from Mojo::Promise.

METHODS

    Mojo::IOLoop::Delay inherits all methods from Mojo::Promise and
    implements the following new ones.

 begin

      my $cb = $delay->begin;
      my $cb = $delay->begin($offset);
      my $cb = $delay->begin($offset, $len);

    Indicate an active event by incrementing the event counter, the
    returned code reference can be used as a callback, and needs to be
    executed when the event has completed to decrement the event counter
    again. When all code references generated by this method have been
    executed and the event counter has reached zero, "steps" will continue.

      # Capture all arguments except for the first one (invocant)
      my $delay = Mojo::IOLoop->delay(sub ($delay, $err, $stream) { ... });
      Mojo::IOLoop->client({port => 3000} => $delay->begin);
      $delay->wait;

    Arguments passed to the returned code reference are spliced with the
    given offset and length, defaulting to an offset of 1 with no default
    length. The arguments are then combined in the same order "begin" was
    called, and passed together to the next step.

      # Capture all arguments
      my $delay = Mojo::IOLoop->delay(sub ($delay, $loop, $err, $stream) { ... });
      Mojo::IOLoop->client({port => 3000} => $delay->begin(0));
      $delay->wait;
    
      # Capture only the second argument
      my $delay = Mojo::IOLoop->delay(sub ($delay, $err) { ... });
      Mojo::IOLoop->client({port => 3000} => $delay->begin(1, 1));
      $delay->wait;
    
      # Capture and combine arguments
      my $delay = Mojo::IOLoop->delay(sub ($delay, $three_err, $three_stream, $four_err, $four_stream) { ... });
      Mojo::IOLoop->client({port => 3000} => $delay->begin);
      Mojo::IOLoop->client({port => 4000} => $delay->begin);
      $delay->wait;

 pass

      $delay = $delay->pass;
      $delay = $delay->pass(@args);

    Shortcut for passing values between "steps".

      # Longer version
      $delay->begin(0)->(@args);

 steps

      $delay = $delay->steps(sub {...}, sub {...});

    Sequentialize multiple events, every time the event counter reaches
    zero a callback will run, the first one automatically runs during the
    next reactor tick unless it is delayed by incrementing the event
    counter. This chain will continue until there are no remaining
    callbacks, a callback does not increment the event counter or an
    exception gets thrown in a callback. Finishing the chain will also
    result in the promise being fulfilled, or if an exception got thrown it
    will be rejected.

SEE ALSO

    Mojolicious, Mojolicious::Guides, https://mojolicious.org.

AUTHORS

    The "AUTHORS" in Mojolicious

CONTACT

    While this module is no longer receiving non-security related
    maintenance, if you must contact someone about it please contact Joel
    Berger <jberger@cpan.org> or as a last resort contact the Mojolicious
    Core Team.

COPYRIGHT AND LICENSE

    Copyright (C) 2008-2021, Sebastian Riedel and others.

    This program is free software, you can redistribute it and/or modify it
    under the terms of the Artistic License version 2.0.